250 gto | FerrariChat

250 gto

Discussion in 'Recreations & Non-Period Rebodies' started by Sculpt32, Jul 19, 2020.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Sculpt32

    Sculpt32 Rookie

    Jul 19, 2020
    6
    Full Name:
    Jack nimble
    #1 Sculpt32, Jul 19, 2020
    Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login I started a project that is my interpretation of a gto. It is wider than the original and most of the shape was done by eye. No computer generation was used in the design. It has a custom chassis started with a jaguar v12 with carbs and a tremec tko 6spd trans. Ford nine inch. Four link and tubular control arm front suspension. custom wire wheels and cooper radials. Im just sharing a project that might be of interest to some of you.
     
    BJK, ChipG, tritone and 1 other person like this.
  2. John Vardanian

    John Vardanian F1 Rookie

    Jul 1, 2004
    3,045
    San Francisco Area
    Full Name:
    John Vardanian
    #2 John Vardanian, Jul 19, 2020
    Great workmanship. Thanks for sharing it with us. Keep us posted.

    john
     
    ChipG and turbo-joe like this.
  3. ronc52

    ronc52 Karting

    Aug 25, 2010
    132
    Full Name:
    Ron
    #3 ronc52, Jul 21, 2020
    Looking good! great project!
     
    turbo-joe likes this.
  4. turbo-joe

    turbo-joe F1 Veteran

    Apr 6, 2008
    8,918
    southwest germany and thailand
    Full Name:
    romano schwabel
    #4 turbo-joe, Jul 21, 2020
    jack, where are you located? your profile says nothing
     
  5. Sculpt32

    Sculpt32 Rookie

    Jul 19, 2020
    6
    Full Name:
    Jack nimble
    #5 Sculpt32, Jul 22, 2020
    North Carolina
     
    turbo-joe likes this.
  6. Maui Mangulabnan

    Maui Mangulabnan Rookie

    May 13, 2019
    2
    Full Name:
    Federico
    #6 Maui Mangulabnan, Jul 28, 2021
    WOW looks great. How's the build going so far hope to see this thing done :>
     
  7. Sculpt32

    Sculpt32 Rookie

    Jul 19, 2020
    6
    Full Name:
    Jack nimble
    #7 Sculpt32, Jul 28, 2021
    I havent done anything on it in a while.
    Looking for a donor chassis for it now. Probably corvette.
     
    Maui Mangulabnan likes this.
  8. Sculpt32

    Sculpt32 Rookie

    Jul 19, 2020
    6
    Full Name:
    Jack nimble
    #8 Sculpt32, Jul 28, 2021
    Not for that one but a new one.
    The one pictured is a customer car. Nothing done since that post.
     
    Maui Mangulabnan likes this.
  9. Sculpt32

    Sculpt32 Rookie

    Jul 19, 2020
    6
    Full Name:
    Jack nimble
    #9 Sculpt32, Jul 28, 2021
    Not for that one but a new one.
    The one pictured is a customer car. Nothing done since that post.
     
  10. Maui Mangulabnan

    Maui Mangulabnan Rookie

    May 13, 2019
    2
    Full Name:
    Federico
    #10 Maui Mangulabnan, Jul 29, 2021
    I'm Pretty excited on your build, can i ask why not build a custom chassis? and what engine are you planning to use. sorry for so much questions i've been looking at GTO build in this Forum and i think you're the only one who's active on the build(s). GODSPEED on the build :)
     
  11. Sculpt32

    Sculpt32 Rookie

    Jul 19, 2020
    6
    Full Name:
    Jack nimble
    #11 Sculpt32, Jul 29, 2021
    The first one pictured does have a custom chassis with ford nine inch rear and four link. Front is a speedway motors tubular control arm front crossmember kit with manual steering rack. I have a jaguar v12 with a tremec five speed mocked up in it with the carb conversion on top of the engine.
    The new one is gonna be a more modern version with bigger wheels, not spoked and probably a small block chevy with stacked injection.
     
    Maui Mangulabnan likes this.

Share This Page