3.2 Mondial Gearbox oil leak problem

Stan
I've been checking your thread because I to would like some info on replacing that seal. Mine started to leak when I changed my gear oil to Redline. My car is a 79 308 but maybe they are the same or simular. Anyway lets throw this thread out there again to see if anyone has some info.

 

I am not exactly sure how the shift rod is removed from the gearbox, but I do know you need to remove both sump pans to do the job. The 1979 308 will take 2 O-rings 105558 for shift shaft seals, while the 1987 Mondial takes 2 of p/n 115372 seals. The gbx sump gasket (larger) is 147675 and the engine sump gasket (smaller) is 147676. Also, put the shift lever into second gear before you begin. I remember this being important for re-assembly and alignment/adjustment of the linkage.
Good Luck.

 

Thanks
Now at least I have some idea what I'm up against.

 

Did you try a search on "308 shift shaft"? Should get you a lot of good threads with pics.