3.5/3.7/4.0 Water pump seals? | FerrariChat

3.5/3.7/4.0 Water pump seals?

Discussion in 'Maserati' started by 67alloy, Feb 5, 2009.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. 67alloy

    67alloy Karting

    Jun 11, 2007
    111
    Anybody have a source for new water pump rebuild kit (impeller seals)? I know they are obsolete, but maybe someone has a fix for Sebring, 3500, Mistral???
     
  2. eogorman

    eogorman Formula Junior

    May 10, 2005
    337
    Buhl, ID
    Full Name:
    Eugene O'Gorman
    There is an easy modification which uses an industrial pump seal. The seal I use is a US Seal # PS360. Cost is about $30. It requires the impeller to be machined .130 inch. But most impellers need to be machined to repair the damage. I have used this seal for over twenty years in six different Maseratis and have not had one fail. If you must have the original seal contact me off line. I do have two.
     
  3. 67alloy

    67alloy Karting

    Jun 11, 2007
    111
    Thanks Gene,
    I should have contacted you first. We wanted to avoid any machining (and also had a fan clutch problem to deal with) so we sprung for the MIE conversion. $650 w/exchange for the whole pump with clutch. There is also a seal available in Italy that is recommended but again requires machining.
     

Share This Page