308/328/mondial spark plug wires | FerrariChat

308/328/mondial spark plug wires

Discussion in '308/328' started by Crock328, Jan 1, 2023.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Crock328

    Crock328 Rookie

    Oct 4, 2022
    3
    Cincinnati Ohio
    Full Name:
    Christopher Rockenfield
    Since I am new to the forum… I am very green in the Ferrari world! Recently I have purchased a 1986 328 GTS… my intention was to send to service it properly… but to my surprise I have receipts that it has had I full engine service around 107 miles ago…with that being said I have a new set of plug wires I would like to sell… They are from Kingsbourne… IGN 9913 set… they have never been open before… and they are dated from 10/22 when I purchased them… They list for almost $850.00…I would hate for them to go to waste by time… so I would like to sell them… I feel my loss is someone’s gain…I would take $550.00 for them and I will cover to shipping ( continental U.S. only) please look at the photos attached.
    thanks for your consideration,Chris
    Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login Image Unavailable, Please Login
     
    miketuason likes this.
  2. yelcab

    yelcab F1 World Champ
    Consultant

    Nov 29, 2001
    13,583
    San Carlos, CA
    Full Name:
    Mitchell Le
    Oh, Kingsborne caught on with the outrageous pricing now. If you have the rubber ends and the silicone sleeves, you can buy the wires and terminal bits from Kingsborne to make your own set of wires for ... $50 or thereabout.
     
    lm2504me likes this.
  3. ginoBBi512

    ginoBBi512 F1 Rookie
    BANNED

    Oct 9, 2016
    3,535
    SO CAL
    Full Name:
    GINO RUGGIERO
    I would give you 150 for them.

    Big G
     
  4. maurice70

    maurice70 F1 Rookie

    Jan 25, 2004
    4,334
    Sydney
    Full Name:
    maurice T
    That's sort of what I did,, I just reused my original sleeves and boots and used a set of premade Bosch leads.
     
    350HPMondial likes this.
  5. 350HPMondial

    350HPMondial F1 Veteran
    Silver Subscribed

    Feb 1, 2002
    5,325
    18 mi from the surf,, close to Pismo, CA
    Full Name:
    Edwardo
    Yes,
    1) order Solid Core wire from an automobile parts house. ( aka summit .. etc.)
    2) Assemble yourself. Use the red or black resistor leads ,, as your car came with originally.
    ( smile)
    Note; Don’t deviate from the above,, or your car won’t run.
    Lol

    Edwardo.
     
  6. lm2504me

    lm2504me Formula 3
    Silver Subscribed

    Aug 26, 2004
    1,122
    Nipomo, CA
    Full Name:
    Richard
    I used the copper stranded Kingsborne red spark plug wire. I do not use my radio.
     

    Attached Files:

Share This Page