308 Air Cleaner hold down nut | FerrariChat

308 Air Cleaner hold down nut

Discussion in 'Ad Archives' started by Casino Square, May 3, 2015.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Casino Square

    Casino Square Formula 3
    Rossa Subscribed

    Apr 21, 2004
    1,728
    Hong Kong / USA
    Full Name:
    Andrew
    I need one original equipment knurled nut to hold down the air cleaner cover on a 77 308. Thanks in advance.
     
  2. BigTex

    BigTex Seven Time F1 World Champ
    Owner Rossa Subscribed

    Dec 6, 2002
    79,337
    Houston, Texas
    Full Name:
    Bubba
    Ricambi USA has them....

    I think I may have accidentally left a set in the car I sold!

    But they are only about $8 each.

    There are two styles, one has a dome top.
    The correct ones for our 1977s let the stud go thru the top exposed.

    If you put a dab of epoxy on them, and they are supposed to have a rubber washer underneath, they are not so inclined to rattle off!

    The rubber washers I use faucet washers from the hardware store.
    Helps with vibration damping, IMO.
     
  3. Oengus

    Oengus F1 World Champ
    Rossa Subscribed Silver Subscribed

    Andrew I have some I think.
    pm me your addy and Ill send you one.
     
  4. dflett

    dflett Formula 3
    Silver Subscribed

    Jun 24, 2005
    1,632
    NY
    Full Name:
    David
    The flat versions are available from Maranello Concessionaires in the UK along with the washers. The domed ones are NLA most places as far as I know.
     

Share This Page