308 block / transaxle separation | FerrariChat
Buy

308 block / transaxle separation

Discussion in '308/328' started by Little_Boat_53, Aug 1, 2025 at 1:59 PM.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Little_Boat_53

    Little_Boat_53 Rookie

    Jul 28, 2022
    14
    Full Name:
    GEORGE W Rhoad Jr.
    #1 Little_Boat_53, Aug 1, 2025 at 1:59 PM
    I am in the midst of separating my 308 (2v 1976 Vetroresina) engine block and transaxle.
    I had read on a thread earlier of 20 bolts holding the units together.
    I have only found 19.....
    Is there one "hiding " on me or was the 20 number someone's estimate?
    Neither the OWM or Parts Diagrams are much help so I'm asking "One who has gone before"
    Thanks in advance, Bill
     
  2. DavidB_SD

    DavidB_SD Karting

    Sep 7, 2008
    65
    San Diego, CA
    Full Name:
    David B
    #2 DavidB_SD, Aug 1, 2025 at 2:56 PM
    I’m going off memory here, but I believe one of the nuts is located inside the transaxle itself somewhere along the perimeter of the mating surfaces.

    -David
     
  3. Newman

    Newman F1 World Champ
    Consultant Owner Professional Ferrari Technician

    Dec 26, 2001
    14,473
    Canada
    Full Name:
    Newman
    #3 Newman, Aug 1, 2025 at 4:46 PM
    Once the bellhousing and adapter plate is off there's one nut dangling above the spinning gears in your gearbox :)
     
  4. pshoejberg

    pshoejberg Formula 3
    Silver Subscribed

    Dec 22, 2007
    1,829
    Denmark
    Full Name:
    Peter H
    #4 pshoejberg, Aug 2, 2025 at 4:55 PM

Share This Page