308 column switch housing crack repairs | FerrariChat
Buy

308 column switch housing crack repairs

Discussion in '308/328' started by chairpilot, Oct 17, 2009.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. chairpilot

    chairpilot Formula 3

    Mar 3, 2007
    1,547
    LA, CA & Olympia, WA
    Full Name:
    PlateClipGuys
    #1 chairpilot, Oct 17, 2009
    Last edited by a moderator: Sep 7, 2017
    While redoing my dash and cleaning up the harness routing, I had Verell rebuild my column stalk switches. One added problem discovered was cracks in the housing where it clamps to the steering column. Verell recommended drilling holes at the end of the cracks which I filled in with crazy glue. At the bolt hole I fashioned a "staple" out of some stainless steel welding rod (1/16" dia) and inserted it across the crack area. I then filled the area in with JB weld. We'll see if it holds up over time.

    Bob R.
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
    Image Unavailable, Please Login
     
  2. miketuason

    miketuason F1 World Champ
    Owner Silver Subscribed

    Feb 24, 2006
    15,814
    Cerritos, CA.
    Full Name:
    Mike
    #2 miketuason, Oct 17, 2009
    Dang Bob, you've been busy, I should come over and check what else you're doing:)
    Good job on the repair.
     

Share This Page