News

308 dust shield,front hub

Discussion in '308/328' started by CaptOharry, Feb 21, 2010.

  1. CaptOharry

    CaptOharry Formula Junior

    Jan 4, 2009
    722
    Green Cove Spgs FL
    Full Name:
    Harry Welch
    Is there anyone who knows who to contact for a dust shield for the front hub,I replaced the bearings,Seals on both hubs.The big problem is one is out of round,I tried to repair it but hit a brick wall.T-rutlands was a Zero , Italian Car Parts a Zero.If anyone knows where I can buy one please help.I did take the good one to Napa,O'riley's,Discount Auto Still batting Zero,Problem is it's the only part holding up the reassembly.Thanks for any Info.
     
  2. To remove this ad click here.

  3. pad

    pad Formula 3

    Sep 30, 2004
    1,409
    Tequesta, FL
    Full Name:
    Paul Delatush
    I went through the same dance last year. Did you try Ricambi?
     
  4. ramosel

    ramosel Formula 3

    Sep 11, 2004
    1,236
    Meadow Vista, CA
    Full Name:
    R Moseley
    If used is OK, FerrParts has a QV they are breaking. You didn't specify year or model, but they may all be the same.

    Rick
     
  5. 2dinos

    2dinos F1 Rookie

    Jan 13, 2007
    2,525
    post a picture
     
  6. Nurburgringer

    Nurburgringer F1 World Champ

    Jan 3, 2009
    10,615
    Texass
    I left them off my '85 when the front brakes were rebuilt last summer.
    Will check to see if they're still around, but think I may have tossed them..
     
  7. To remove this ad click here.

  8. CaptOharry

    CaptOharry Formula Junior

    Jan 4, 2009
    722
    Green Cove Spgs FL
    Full Name:
    Harry Welch
    Thanks for the info,I just found a close replacement at a Trailer Repair Store.But Hey! Nurburgringer if you find them I'll take them,You can E-mail me at harjen@bellsouth.net
     

Share This Page