308 Exhaust | FerrariChat
Buy

308 Exhaust

Discussion in '308/328' started by sbowden1951, Jun 17, 2025.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. sbowden1951

    sbowden1951 Rookie

    May 31, 2024
    1
    Miramar Beach
    Full Name:
    Stephen Bowden
    #1 sbowden1951, Jun 17, 2025
    The exhaust pipes on my 308 don't have clamps, just put in place. Seems like a carbon monoxide risk but I have to assume this is how they are supposed to be
     
  2. Imatk

    Imatk Formula Junior

    May 6, 2007
    768
    #2 Imatk, Jun 17, 2025
    Not sure exactly what you mean. Do you mean they don't have hangars?

    That system is very solid under there. I dismantled the entire assembly and believe me... it's NOT going anywhere.

    Unlike a system on a Mustang, (or I imagine any front-engine car) you don't have long exhaust runners. It's very compact and the steel is very rigid... so, no need for hangars on the parts you showed.

    There are two coil hangars for the entire system... they look like this:

    Image Unavailable, Please Login
     
  3. rwbolt1

    rwbolt1 Karting

    Sep 10, 2006
    214
    Boerne, TX
    Full Name:
    Rodney Bolt
    #3 rwbolt1, Jun 17, 2025
    There are large thick metal sealing rings (gaskets) in between these fittings which prevent exhaust gasses from escaping past. Yours look very rusted, but still probably doing their job. Replacements are readily available and inexpensive. Image Unavailable, Please Login
     
  4. Steve Magnusson

    Steve Magnusson Two Time F1 World Champ
    Lifetime Rossa

    Jan 11, 2001
    26,785
    30°30'40" N 97°35'41" W (Texas)
    Full Name:
    Steve Magnusson
    #4 Steve Magnusson, Jun 17, 2025
    Last edited: Jun 17, 2025
    This rigid bolted connections is OKish as it has the donut gasket present (although the spring-loaded bolts, with donut gasket, are better/more reliable):

    Image Unavailable, Please Login

    This rigid bolted connection (at the upper right) is not very OKish as the donut gasket is missing:

    Image Unavailable, Please Login

    This is how all of those connections would be when stock:

    [​IMG]
     

Share This Page