News

For Sale 308 F106 A E * 00767 Engine

Discussion in 'Ferrari Parts & Collectibles' started by guygowrie, Jul 14, 2019.

  1. guygowrie

    guygowrie Formula 3
    Silver Subscribed

    Sep 19, 2011
    1,382
    ct
    Full Name:
    guy s
    308 F106 A E * 00767 Engine - $8500 with local pickup Tenafly NJ.

    this engine left the factory in a 1978 308 GTS - carbed 2v engine.

    Used for a few years in my 308 GT4 and removed to install the original Gt4 engine. My Gt4 is now sold and I'm now selling this engine.The engine was running great when pulled and only pulled to reinstall the original motor in my Gt4.

    I did the belts two winters ago. It has Hill engineering tensioners. It has a Forza waterpump that I installed (almost $800) that is much sturdier and seems even after a decade they don't fail or need rebuilding.

    I've set it up with Electromotive electronic ignition. ie crank fired. The complete system can be included for an extra $500 (cost over $2k as I recall). Great system.

    Otherwise, totally reversible to dizzies.

    Included in $8500:

    complete engine and carbs as pictured with Starter and alternator.
    front and rear headers in VGC (one has the insulation still intact)
    a/c pump and mounts.
    3 heatshields
    1 distributor, 3 distributor caps, small boxs of extra

    The car is located at Auto Elite in NJ which would be a good place to transplant the engine if you need. Great engine to revive a 2v 308 without going the full blown rebuild.

    This is some history on where this engine came from:

    http://www.ferrarichat.com/forum/308-328-sponsored-yellow-compass-group/323318-my-first-ferrari.html

    Casey, the guy I bought it from confirmed. See further photos below showing he had the heads off (good news in itself)

    Exhaust valves 5-8
    Valve stem seals
    Clear coolant passages of crud
    Head and cam cover gaskets
    Cam seals
    Hill tensioner bearings
    No bottom end

    +++

    Expect to require some fasteners or fittings although I will go through with Vinny to make sure most are there.

    ++

    At $8500 this is asking less than the sum of its parts and was a very reliablle and well running engine while in my Gt4.

    pm me or email me at guygowrie@hotmail.com

    Thanks!

    Image Unavailable, Please Login
     
  2. guygowrie

    guygowrie Formula 3
    Silver Subscribed

    Sep 19, 2011
    1,382
    ct
    Full Name:
    guy s
  3. guygowrie

    guygowrie Formula 3
    Silver Subscribed

    Sep 19, 2011
    1,382
    ct
    Full Name:
    guy s
  4. DonB

    DonB Karting
    Rossa Subscribed

    Nov 11, 2003
    240
    Florida
    Full Name:
    Don Bartz
  5. guygowrie

    guygowrie Formula 3
    Silver Subscribed

    Sep 19, 2011
    1,382
    ct
    Full Name:
    guy s
    Hi Don

    Ofcourse it could although I dont have any experience doing so. Looks like there are some pallet/box combinations that can be purchased for a few hundred.

    And I have no idea of what it would cost to ship it say to Florida (again, no personal experience in shipping items of this size. there are some online websites that promise quotes but I think are just generating leads.

    Guy




    Sent from my iPhone using Tapatalk
     
  6. 19633500GT

    19633500GT F1 Veteran
    Rossa Subscribed

    Nov 9, 2010
    5,901
    Connecticut
    Full Name:
    Ken S
    Don, I just used YRC Freight for a heavy item, and they were excellent. It was 400lbs+ and cost about $500 to ship from CT to Illinois.


    If Guy has the dimensions, weight (general) and specifics (ie. full engine), then use this info and they should be able to generate a quote, pick up time and etc.

    I bet the shop in NJ could at least get it palletized and shrink wrapped for prep to be picked up.

    This is a LOT of engine for cheap. Wish I had the coin myself

    Image Unavailable, Please Login
     
    guygowrie likes this.
  7. Vonbarron

    Vonbarron Formula Junior
    Rossa Subscribed Owner

    Aug 26, 2014
    616
    Sammamish Washington
    Full Name:
    S Barron
    How long after payment could I leave engine in NJ?
     
  8. guygowrie

    guygowrie Formula 3
    Silver Subscribed

    Sep 19, 2011
    1,382
    ct
    Full Name:
    guy s
    Without asking him I think if I get it packed and palleted Vinny would be flexible - few weeks no problem, a month or two possibly also ok.
     
  9. Vonbarron

    Vonbarron Formula Junior
    Rossa Subscribed Owner

    Aug 26, 2014
    616
    Sammamish Washington
    Full Name:
    S Barron
    Sent you an email
     
  10. guygowrie

    guygowrie Formula 3
    Silver Subscribed

    Sep 19, 2011
    1,382
    ct
    Full Name:
    guy s
    replied thanks!

    I dug up some info I sent to a buyer a when I was looking to sell the car with this engine in it:

    "I had a ppi done at Vantage Motorsport 15th May which gave the following compression test figures. Oil and filter also changed then. Belts done last winter.

    Compression test figures:


    Front bank facing passengers l to r: 210 - 200 - 200 - 185

    Rear bank facing rear trunk l to r: 180 - 175 - 180 - 180"
     
  11. guygowrie

    guygowrie Formula 3
    Silver Subscribed

    Sep 19, 2011
    1,382
    ct
    Full Name:
    guy s
    sale pending!
     
  12. BigTex

    BigTex Seven Time F1 World Champ
    Rossa Subscribed Owner

    Dec 6, 2002
    70,785
    Houston, Texas
    Full Name:
    Bubba
    That's one steal of a deal......GLWS!
     
  13. guygowrie

    guygowrie Formula 3
    Silver Subscribed

    Sep 19, 2011
    1,382
    ct
    Full Name:
    guy s
    It needs to move on and power another Ferrari!!
     
    BigTex and 19633500GT like this.

Share This Page