308 front stub axle drawing | FerrariChat
Buy

308 front stub axle drawing

Discussion in '308/328' started by Alex_202, Jan 22, 2022.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Alex_202

    Alex_202 Karting

    Apr 10, 2008
    74
    Sweden
    #1 Alex_202, Jan 22, 2022
    i am planning to use a 308 front spindle as a replacement for the original 330gt 2+2 suspension that, with all recreations, has become too expensive. I have a complete 330, without the corners and drive train that I plan to get back on the road instead of it being parted out.

    This requires a splined hub to accommodate original borrani or campagnolo wheels. I was wondering if anyone here has drawings and measurements of the front stub axle and if available drawings of the rear. By drawing i mean blueprints with measurements, not an assembly drawing.

    With all the e perience here, I was hoping that someone has what I am looking for.

    /Alexander
     
  2. derekw

    derekw Formula 3

    Sep 7, 2010
    1,521
    London, UK
    Full Name:
    Derek W
    #2 derekw, Jan 23, 2022
    Hej Alex, I suggest you just buy one and find an engineering student at you local university to do the drawings if you can’t yourself. If you are going to use 308 spindles I assume you have to buy a pair?

    where will you find a 330 drivetrain? Perhaps buy a 308 that has had a 330 motor put in, pull the motor and sell the 308 to the electric converters, and use a Getrag 265.
    Lycka till, Derek
     
  3. ProvaMo

    ProvaMo Formula Junior

    Jun 29, 2004
    351
    Mid West
    Full Name:
    Paul John
    #3 ProvaMo, Jan 23, 2022
    Alexander- I'm restoring a 1979 308 GTS with the spindles out, see pic. I'm decent with a dial caliper if some measurements in mm would help...
    v/r Paul
    Image Unavailable, Please Login
     
  4. Alex_202

    Alex_202 Karting

    Apr 10, 2008
    74
    Sweden
    #4 Alex_202, Jan 25, 2022
    Hi Paul,
    That would be very much appreciated. I watch the progress of the influenzo (great name by the way) and I have no doubt your capabilities given your attention to detail.

    If possible a measurement to the face of the hub of where the brake disc atttaches would be great.

    I’ll PM you my detail.

    /Alexander
     
  5. ozmike

    ozmike Rookie

    May 29, 2010
    37
    Australia
    #5 ozmike, Feb 2, 2022
     
  6. ozmike

    ozmike Rookie

    May 29, 2010
    37
    Australia
    #6 ozmike, Feb 2, 2022
    Hi Alex
    I have the four corners but no car, of a 246 Dino. Complete spindles, hubs ,brakes ,calipers etc.
    also springs and suspension plus four rough Koni .shocks.
    If any of this is of interest contact me and I can detail and send photos
    .Mike
     
  7. Alex_202

    Alex_202 Karting

    Apr 10, 2008
    74
    Sweden
    #7 Alex_202, Feb 12, 2022
    Paul helped me with the measurements.

    Thank you Paul, you’re a legend,
     
  8. ProvaMo

    ProvaMo Formula Junior

    Jun 29, 2004
    351
    Mid West
    Full Name:
    Paul John
    #8 ProvaMo, Feb 12, 2022
    Alexander, you’re very welcome! Hopefully we’ll see some pictures of the project on F-chat someday!
     

Share This Page