308 GTB Instrument panel | FerrariChat
Buy

308 GTB Instrument panel

Discussion in '308/328' started by jratcliff, Apr 27, 2010.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. jratcliff

    jratcliff Formula 3

    Sep 7, 2004
    1,024
    Texas
    #1 jratcliff, Apr 27, 2010
    I understand from previous posts that the windshield needs to be removed on GTB's so that you can remove some rivets. The question is can you re-install the instrument panel if the glass has been installed first?

    John
     
  2. BigTex

    BigTex Seven Time F1 World Champ
    Owner Rossa Subscribed

    Dec 6, 2002
    79,386
    Houston, Texas
    Full Name:
    Bubba
    #2 BigTex, Apr 27, 2010
    There's been a later clarification the glass does not have to come out.....don't recall which thread though
     
  3. Doug

    Doug Formula 3

    Nov 13, 2003
    1,473
    Louisville KY
    Full Name:
    Doug
    #3 Doug, Apr 27, 2010
    Did not have to remove glass on my '77. Once you pull the gauge cluster, there are 4 set screws that hold it on. Very easy to remove for me when I did it . If you are talking about the entire dash, it may require glass removal.
     
  4. jratcliff

    jratcliff Formula 3

    Sep 7, 2004
    1,024
    Texas
    #4 jratcliff, Apr 27, 2010
    Hi Guys,
    I understood from the other posts that this was only for GTS's and not GTB's? Am I mistaken?

    John
     
  5. speedy

    speedy Formula Junior

    Oct 18, 2005
    625
    Plano, TX
    Full Name:
    James Gardner
    #5 speedy, Apr 27, 2010
    Last edited: Apr 27, 2010
  6. Doug

    Doug Formula 3

    Nov 13, 2003
    1,473
    Louisville KY
    Full Name:
    Doug
    #6 Doug, Apr 27, 2010
    Are you talking about the pod that surrounds the instrument panel or the whole dash?
     
  7. jratcliff

    jratcliff Formula 3

    Sep 7, 2004
    1,024
    Texas
    #7 jratcliff, Apr 27, 2010
    Doug,
    The whole dash. The last thing I read on this on GTB's the windshield needed to come out.

    John
     

Share This Page