308 GTB wrong leads ordered | FerrariChat

308 GTB wrong leads ordered

Discussion in 'Technical Q&A' started by 308-newbie, Mar 21, 2008.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. 308-newbie

    308-newbie Guest

    Help! I bought the wrong leads from Re-Originals, PN 9911 which is intended for a single distributor 308. Mine of course has two distributors and should have been SP9920. Should have done that homework up front!

    Question...is it possible to interchange with some modification or are there enough differences in the leads / extenders etc to use? I'll been in to them for about $100 in S&H charges otherwise I would just return them.

    Any help is greatly appreciated.
     
    308-newbie, Mar 21, 2008
    #1
  2. flaviaman

    flaviaman Formula Junior

    Joined:
    Jul 26, 2005
    Messages:
    318
    Location:
    Vernonia, OR
    Full Name:
    Gregg
    I do not see any reason why you could not use these. Use the old set as a template to cut them to correct length. As the leads on the twin distributor are secured by set screws you do not need to worry about clips for the distributor end.

    Cheers:
     
    flaviaman, Mar 21, 2008
    #2

Share This Page