308 GTSi Ignition Wires | FerrariChat
Buy

308 GTSi Ignition Wires

Discussion in '308/328' started by desire308, Feb 13, 2008.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. desire308

    desire308 Formula 3

    Oct 19, 2007
    1,433
    Florida
    Full Name:
    Peter W
    #1 desire308, Feb 13, 2008
    Has anyone here retro-fit a set of wires on a 2V using the existing extendors and boots? I have heard of this using Accel wire sets for instance bought from NAPA. I am not sure it's nessesary to use "OEM" like the ones Rutlands sells at about $300.00. There's got to be a better way ;) What are the correct "specs". Also...is the same wire used for the coils?
     
  2. WaltP

    WaltP Formula 3

    Nov 1, 2003
    1,512
    Cape Canaveral/Atlanta
    Full Name:
    Walt P
    #2 WaltP, Feb 13, 2008
    I put a set of Taylor 73251 , 8mm wires on my 2v, used existing extenders and the rubber caps to keep trash out of the plug recess. Had enough wire left to use for the second coil.
     
  3. Ricambi America

    Ricambi America F1 World Champ
    Sponsor Owner

    Dec 7, 2003
    16,484
    Winston Salem, NC
    #3 Ricambi America, Feb 14, 2008

Share This Page