308 QV Door lock assembly/disassembly - Help

Fchaters

The exterior door handle of my 308 83 QV became loose. I removed the panel to find out that the head of the bolt that holds the cable has broken (bolt #46) Image Unavailable, Please Login . I found a replacement bolt but now I need help on putting it in place. There is no room and therefore I’m afraid I will have to remove the mechanism from the door to install the new bolt and cable.
Are there any detailed instructions on how to remove and install the all mechanism from the door ?


Sent from my iPhone using FerrariChat

 

Thorn, unfortunately to put that bolt there is not room...with big hand or small hands . The only way is for me to remove the entire mechanism and without some clue or instructions I’m not that confident. Let’s see if someone comes up with some write ups on how should the mechanism be removed


Sent from my iPhone using FerrariChat

 

Thanks for the insight. I did replaced the cable and the bolt. There is no other way to replace the bolt without sliding the mechanism out of the door. Was tedious but it’s done. Thanks


Sent from my iPhone using FerrariChat