308 qv no spark | FerrariChat

308 qv no spark

Discussion in '308/328' started by 124turbo, Jun 12, 2011.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. 124turbo

    124turbo Rookie

    Feb 22, 2007
    42
    Franklin Park Il
    Full Name:
    Anthony
    It drove fine the other day and today no spark. I checked for 12v at the coils and ignition modules. Do crank sensors go bad and if they do can i go to my local parts store and get one? Thank you for any help i can get
     
  2. Iain

    Iain F1 Rookie

    Jan 21, 2005
    3,354
    UK
    Crank sensors can go bad but are easy to test. Just put a meter across it & measure the resistance. You are looking for anywhere in the 600-1000 ohm range. Anything outside of this or open circuit & replacement is needed.
     
  3. Owens84QV

    Owens84QV F1 Rookie

    Oct 2, 2001
    4,486
    Somewhere in NC
    Full Name:
    Greg
    No you cannot...not unless your local parts store is Ricambi America or Dennis McCann All Ferrari Parts. Each crank sensor is ~ $100 and I believe all 308's have 3 of them. While you are changing 1, change all 3.
     
  4. Iain

    Iain F1 Rookie

    Jan 21, 2005
    3,354
    UK
    I recently changed the sensors on my 328 (which I think are the same parts, but there are only two of them). They were around $55 each equivalent - so shop around.

    (Try here: http://www.superformance.co.uk/a-308/electrical.htm )
     

Share This Page