308 QV spacers

Hi I’m just about ready to refit my engine. But I can’t remember where the 2 spacers on the left came from. The longer 2 on the right are the front engine mount spacers.

Anyone one recognise them, I do not remember
them being the rear engine spacers but they could be.

I rebuilt the suspension but I don’t think they are from there.


Image Unavailable, Please Login

 

Thanks for the input Ron

The right hand bushes are the right ones for the front engine mounts as I marked front engine mount. the left I don’t remember them at all

right bushes
32mm (1 17/64”) tall
25mm (1”) OD
12.5mm (1/2”) ID

left bushes

23mm (29/33”) tall
27.5 (1 5/64) OD
12.5mm (1/2”)ID

 

No one recognise them?

 

Thanks
I replaced those bushes when I did the suspension but these are different and have been exposed all there life so rusty on the outside

thanks anyway

 

No as one of the rear mounts was broken so I unbolted it from the engine to take the engine out and removed the broken mount once the engine was removed so I remember there were no spacers like those.

thanks

 

Thanks Ferrari owner, those are the ones I put on the under the front engine mounts I still have the other two and non the wiser.