308 rear rotors min thickness | FerrariChat
Buy

308 rear rotors min thickness

Discussion in '308/328' started by dcbell56, Mar 9, 2008.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. dcbell56

    dcbell56 Rookie

    Feb 7, 2008
    3
    Tukwila, Wa.
    Full Name:
    David Bell
    #1 dcbell56, Mar 9, 2008
    Does anyone have the spec for minimun "turn to" or discard limit on 308 QV brake rotors? Thanks.
     
  2. Jbryant

    Jbryant Karting

    Sep 23, 2006
    220
    California City
    Full Name:
    Jeff Bryant
    #2 Jbryant, Mar 10, 2008
    I just bought new rotors all around for my 308 GTSi. Believe it or not, there much less expensive from Eurospares then any I have seen in the states. Had them in stock and I had them in Three days from time of order. Check them out.

    I believe the rear to be 18mm and the front to be 22mm

    Jeff
     
  3. fastradio

    fastradio F1 Rookie
    BANNED Professional Ferrari Technician

    Apr 26, 2006
    3,664
    New England
    Full Name:
    David Feinberg
    #3 fastradio, Mar 10, 2008
    David,
    This spec should either be stamped on the face of the rotor near the hub, or along the outer perimeter of the rotor. On the rears, I'd figure that no more than 1mm can safely be machined (off, from new).

    Regards,
    David
     
  4. WaltP

    WaltP Formula 3

    Nov 1, 2003
    1,512
    Cape Canaveral/Atlanta
    Full Name:
    Walt P
    #4 WaltP, Mar 10, 2008
  5. roccopof

    roccopof Karting

    Jul 10, 2006
    113
    Oakland
    Full Name:
    Rocco
    #5 roccopof, Mar 10, 2008
    How much did eurospares charge you? Are they cheaper than tirerack?
     
  6. pdmracing

    pdmracing Formula Junior

    Feb 14, 2007
    755
    atlanta
    #6 pdmracing, Mar 10, 2008
    wow the rear rotors doubled this year!
     
  7. wolftalk

    wolftalk Formula Junior

    Jan 27, 2004
    367
    san franciso area
    Full Name:
    phil
    #7 wolftalk, Mar 11, 2008
    no numbers stamped on the gtsi rotors when I looked a couple years ago.

    the gt4 and mondial 8/qv manuals says minimum front/rear is 20mm/18mm. Nominal is +2mm for both.
     
  8. chairpilot

    chairpilot Formula 3

    Mar 3, 2007
    1,547
    LA, CA & Olympia, WA
    Full Name:
    PlateClipGuys
    #8 chairpilot, Mar 11, 2008
    My 308 QV fronts are right on 20mm on an odometer showing 23,856 miles. Pads are showing about 8mm. What do you think - leave them, turn them or replace them?
     

Share This Page