308 Replacement Brake Rotors | FerrariChat
Buy

308 Replacement Brake Rotors

Discussion in '308/328' started by Owens84QV, Jun 28, 2009.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Owens84QV

    Owens84QV F1 Rookie

    Oct 2, 2001
    4,486
    Somewhere in NC
    Full Name:
    Greg
    #1 Owens84QV, Jun 28, 2009
    OK...I'm not in the market for one of the big brake upgrade kits, all I want to do is replace the front & rear rotors. I searched on FChat and didn't find much.

    I searched the net and only came up with a couple sources:

    http://www.nfcperformance.com/ferrari-series-c-710_831_1182_1190.html

    http://www.importrp.com/home.php?cat=38&sort=price&sort_direction=0&xid=585f246fda82479325585b864d850f85

    Then, there are the usual sources such as Ricambi / Dennis McCann for pure OEM stuff and I did look at the Girodisc rotors.

    Do others here have sources for front / rear replacement rotors that for some reason I haven't been able to find??
     
  2. chrismorse

    chrismorse Formula 3

    Feb 16, 2004
    2,150
    way north california
    Full Name:
    chris morse
    #2 chrismorse, Jun 28, 2009
    If it were me, i'd compare the price of the girodisc rear rotor/hat cost against what i could find on tire rack, ebay, ect, realizing that the Girodisc set up is lighter and will probably cost less ont he second go round, i might be willing to go that route now.

    hth,
    chris
     
  3. fastkarz

    fastkarz Karting

    May 18, 2006
    72
    San Jose, CA
    Full Name:
    Brian Denton
    #3 fastkarz, Jul 2, 2009
  4. t3thomas

    t3thomas Formula Junior

    May 9, 2008
    427
    North Carolina
    Full Name:
    GThomas
    #4 t3thomas, Jul 2, 2009
    Greg:

    I looked around for a long time and have a long list of links, but the least expensive option I found was from the Import Replacement Parts you listed. If you haven't already done so, go ahead and buy some Goodrich SS lines and Porterfield pads and I think your looking at around $1k no matter how you slice it.
     
  5. BigTex

    BigTex Seven Time F1 World Champ
    Owner Rossa Subscribed

    Dec 6, 2002
    79,386
    Houston, Texas
    Full Name:
    Bubba
    #5 BigTex, Jul 2, 2009
    Brembo has some slotted ones that bolt up, IIRC
     
  6. Owens84QV

    Owens84QV F1 Rookie

    Oct 2, 2001
    4,486
    Somewhere in NC
    Full Name:
    Greg
    #6 Owens84QV, Aug 19, 2009
    Glenn...yep...those are the least expensive that I've found. I already have the replacement Goodrich lines and will also do the pads. I also need to rebuild the calipers since they will be off during the suspension upgrade...all of this will be my winter project!
     
  7. t3thomas

    t3thomas Formula Junior

    May 9, 2008
    427
    North Carolina
    Full Name:
    GThomas
    #7 t3thomas, Aug 20, 2009
    Wow Greg, that certainly was a long time before a response. I'll be glad to help you with the rebuilds when you get to them. I've even got some replacement seals, etc. that I can contribute. You might want to start pulling together the parts since for a total rebuild of front & rear will have to come from two different sources (Pelican Parts and Super Performance UK is where I got mine).
     

Share This Page