308 spark plugs | FerrariChat
Buy

308 spark plugs

Discussion in '308/328' started by nevets308, Oct 24, 2012.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. nevets308

    nevets308 Rookie

    Jul 20, 2012
    37
    So California
    Full Name:
    Steve
    #1 nevets308, Oct 24, 2012
    I am changing the spark plugs on my 85 308 qv. What would the best plug to use, i have noticed NGK has 3 heat ranges.
     
  2. Steve Magnusson

    Steve Magnusson Two Time F1 World Champ
    Lifetime Rossa

    Jan 11, 2001
    26,823
    30°30'40" N 97°35'41" W (Texas)
    Full Name:
    Steve Magnusson
    #2 Steve Magnusson, Oct 24, 2012
    No need to get so fussy about this (heat range) on your 308QV (vs a carb 308) as it has much better AFR control and a better ignition system -- NGK BPR7ES or NGK BPR7EIX would be fine IMO...
     
  3. Matto

    Matto Formula 3

    Dec 26, 2011
    2,085
    Mooresville, NC USA
    Full Name:
    Matthew
    #3 Matto, Oct 24, 2012
    NGK's BP7ES runs great in my QV. $2.60 each from Amazon.com. I installed them back in June.
     
  4. stefnews

    stefnews Karting

    Nov 23, 2010
    81
    EU-Hungary, Budapest
    #4 stefnews, Oct 24, 2012
    I use BERU UX56, with four pole. .

    Not the cheapest, but the best solution. I had also drive with NGK BP7ES. But with the BERU have stronger torqe on low rpm-s. Must testing an you will see.
     
  5. stev4266

    stev4266 Karting

    Mar 24, 2010
    186
    R.I.
    Full Name:
    steven gregson
    #5 stev4266, Oct 25, 2012
    are the BERU UX56 made by NGK ?
     
  6. alhbln

    alhbln Formula 3
    Consultant Owner

    Mar 4, 2008
    1,749
    Berlin, Germany
    Full Name:
    Adrian
    #6 alhbln, Oct 25, 2012
    +1 for BPR7EIX fine tip plugs, best choice for the factory ignition setup
     
  7. stefnews

    stefnews Karting

    Nov 23, 2010
    81
    EU-Hungary, Budapest
    #7 stefnews, Oct 26, 2012
    No NGK, BERU is made in Germany.
     
  8. FasterIsBetter

    FasterIsBetter F1 Veteran

    Jul 22, 2004
    5,855
    NoNJ/Jupiter FL
    Full Name:
    Steve W.
    #8 FasterIsBetter, Oct 26, 2012
    I used the NGK BPR7EIX plugs in my '78 GTS after I installed the Electromotive system, and they worked great. With the regular ignition system before installing the Electromotive, I used the NGK BPR6ES plugs, and they were fine with the stock distributor system.
     
  9. Matto

    Matto Formula 3

    Dec 26, 2011
    2,085
    Mooresville, NC USA
    Full Name:
    Matthew
    #9 Matto, Oct 26, 2012
    This thread could go long............... :)
     

Share This Page