308 targa top cover tenax pins | FerrariChat

308 targa top cover tenax pins

Discussion in '308/328' started by stonker, Jan 23, 2025.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. stonker

    stonker Formula Junior

    Jul 14, 2012
    420
    Surrey UK
    Full Name:
    Stonker
    Hi, I wondered if anybody might be able to measure the location of the bottom targa top cover tenax pins that hold the cover in place. My car has the top ones but is missing the bottom ones. I've sourced the pins but would be great to know the original location. I'm pretty sure they are a self taping type pin that screws through the carpet and floor?

    Thanks very much!
     
  2. Imatk

    Imatk Formula Junior

    May 6, 2007
    768
    On my '82 on the driver's side the fastener is about 4 3/4 inch from the side of the "hump" next to the door and 3 inches from the back wall.

    This is with carpeting obviously so it may vary.
     
    stonker likes this.
  3. waymar

    waymar Formula 3

    Sep 2, 2008
    1,354
    Northeast, PA - USA
    Full Name:
    Wayne Martin
    If they were there in the past there should be holes in the floor board metal. Maybe pull the carpet back a bit….
     
    Zenobie and flyngti like this.
  4. Alex308qv

    Alex308qv Formula Junior

    Jul 1, 2016
    405
    PA
    Full Name:
    Alex
    Believe it's fiberglass. Had to replace a missing one as well.
     

Share This Page