308 tools, Clutch lock nut, 30K service | FerrariChat
Buy

308 tools, Clutch lock nut, 30K service

Discussion in 'Technical Q&A' started by Mike1od, Apr 30, 2006.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Mike1od

    Mike1od Rookie

    Apr 24, 2006
    10
    La Quinta, Ca
    Full Name:
    Michael ODonnell
    #1 Mike1od, Apr 30, 2006
    I am going to start the clutch R/R. In reading art. It appears a special socket is necessary for the lock nut removal. I am having trouble locating one does anyone have a recommendation and are there any other specility tools I should be looking for I am also preforming a 30K service.

    Mike
     
  2. Sloan83qv

    Sloan83qv F1 Rookie
    BANNED

    Mar 8, 2001
    2,537
    with BIG Dave M.
    Full Name:
    Little Dave M.
    #2 Sloan83qv, Apr 30, 2006
    http://www.baumtools.com/

    Click on Ferrari
     
  3. don_xvi

    don_xvi F1 Rookie

    Nov 1, 2003
    2,934
    Outside Detroit
    Full Name:
    Don the 16th
    #3 don_xvi, Apr 30, 2006
    There's also been some discussion of making one of these; I think some website mentioned what size socket to use. Basically, wht you do is get a socket of X size, then use a Dremel or similar tool to remove material to give you the 4 drive pins of the special socket. It might take a few shots, but eventually a search should produce something.
     
  4. jon s

    jon s Formula Junior

    Mar 9, 2005
    509
    pocasset ma
    Full Name:
    jon shoukimas MD
    #4 jon s, Apr 30, 2006
    i made one this spring for the clutch job. if you want to borrow it let me know. regards, jon s.
     
  5. Iain

    Iain F1 Rookie

    Jan 21, 2005
    3,324
    UK
    #5 Iain, Apr 30, 2006
    The tool seems to appear on Ebay fairly regularly.
     
  6. tbakowsky

    tbakowsky F1 World Champ
    Consultant Professional Ferrari Technician

    Sep 18, 2002
    19,969
    The Cold North
    Full Name:
    Tom
    #6 tbakowsky, Apr 30, 2006
    Baum Tools..F102 socket
     
  7. Verell

    Verell F1 Veteran
    Consultant Owner

    May 5, 2001
    7,022
    Groton, MA
    Full Name:
    Verell Boaen
    #7 Verell, May 1, 2006
    Use an impact socket, they're much stronger/tougher than a regular socket of the same size.
     
  8. yelcab

    yelcab F1 World Champ
    Consultant

    Nov 29, 2001
    13,593
    San Carlos, CA
    Full Name:
    Mitchell Le
    #8 yelcab, May 1, 2006
    If you want to make one, start with a bench grinder, and finish off with a dremmel tool. Or it will take forever.
     
  9. andrewg

    andrewg F1 Rookie
    BANNED

    Sep 10, 2002
    4,667
    Chester, England
    Full Name:
    AndrewG
    #9 andrewg, May 1, 2006
  10. mad dog

    mad dog Formula Junior

    Jan 5, 2006
    875
    suffolk uk
    Full Name:
    andrew
    #10 mad dog, May 1, 2006

Share This Page