308qv Distributor Rotor Arm Position | FerrariChat

308qv Distributor Rotor Arm Position

Discussion in '308/328' started by sdsdesilva, May 24, 2018.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. sdsdesilva

    sdsdesilva Rookie

    Apr 10, 2005
    39
    Cambridge UK
    Full Name:
    sdsdesilva
    I have removed the drive pin at the end of the camshaft to replace the o ring. I want to be 100% sure before I re-install the rotor arm drive pin, as this can be 180 deg out if I get it wrong.
    Can someone please confirm position of rotor arm for front and rear bank. Thank You
     
  2. kcabpilot

    kcabpilot Formula 3

    Apr 17, 2014
    1,608
    California SF bay area
    Full Name:
    Paul
    Both of my cams are sitting on a table I can give you a picture/answer tonight if no one else chimes in first.
     
  3. sdsdesilva

    sdsdesilva Rookie

    Apr 10, 2005
    39
    Cambridge UK
    Full Name:
    sdsdesilva
    yes please. Position of the rotors w.r.t cam alignment marks.
     
  4. kcabpilot

    kcabpilot Formula 3

    Apr 17, 2014
    1,608
    California SF bay area
    Full Name:
    Paul
    looking at distributor end with sprockets at far end and alignment mark straight up at 0 deg

    1-4 rotor is 160 deg
    5-8 rotor is 240 deg

    My car is US 1983 QV
     
  5. kcabpilot

    kcabpilot Formula 3

    Apr 17, 2014
    1,608
    California SF bay area
    Full Name:
    Paul
    Just to be clear I'm looking straight down the camshaft from the distributor end and these positions are clockwise from the index mark so it's kind of a backwards reference if you know what I mean.
     
  6. sdsdesilva

    sdsdesilva Rookie

    Apr 10, 2005
    39
    Cambridge UK
    Full Name:
    sdsdesilva
    Thank You
     

Share This Page