News

308v4 or 328 intake CAD drawing

Discussion in 'Technical Q&A' started by atlantaman, May 26, 2004.

  1. atlantaman

    atlantaman Formula 3

    Mar 31, 2002
    1,726
    Roswell, Georgia
    Full Name:
    Charles
    Anyone have an accurate CAD drawing of the top part of a 308v4 or 328 intake? I need to make some new gaskets from 1/4" rubber and need to get then water-jet cut. I did some aluminum spacers a while back and did some drawings in CAD but I would like to see what others may have done.

    Before i spend the $ to do the rubber pieces I want to be sure they are correct.
     
  2. FormulaRacer

    FormulaRacer Formula Junior

    Nov 18, 2003
    261
    Does the shop have a CMM? Just bring them the manifold if you have itoff,CMM it, and you can have one cut within the hour.
     
  3. atlantaman

    atlantaman Formula 3

    Mar 31, 2002
    1,726
    Roswell, Georgia
    Full Name:
    Charles
    No CMM ---- I will probably have to machine an aluminum test piece from my drawing and try that--and make corrections----
    locally I have a company that does waterjet cutting of rubber gaskets and will take an autoCAD download--I just need it to be correct the first time.
     
  4. FormulaRacer

    FormulaRacer Formula Junior

    Nov 18, 2003
    261
    Do you have access to any larger printers?

    You can print out straight drawings 1:1 of them, and tets fit them with paper before cutting them.
     

Share This Page