308 engine bay hose reference thread- sizes and lengths

Since I am replacing many of the engine bay hoses on my 85 QV I thought that i'd list the hose sizes and lengths that you need. If you contribute please list the year and model of your car and use the format below. Thanks

May build 85 308 USA model W/air injection ( very much a cross between 84 QV and 85 328 under the bonet)

Tav 9 (air injection-also found on 85 328 parts book)
#6 -x2- 12 in of 17mm hose
#11 - 30 in of 19mm hose

Tav 10 Fuel Injection System
#50 - 17 in of 8mm hose
#69 - 34 in of 18mm hose
#72 - 19 in of 18mm hose

Tav 14 Blow-by system
#10 - 41 in of 20-21mm hose
#6 - x2- 2in of 20-21mm hose
#9 - 9.5 in of 20-21mm hose
#19 - 13 in of 6-7mm hose

Tav 16 Cooling system
#28 - 22in of 10mm hose

 

Images in order
Tav 9 (Non ABS328 parts book)
Tav 10 Fuel Injection System
Tav 14 Blow-by system
Tav 16 Cooling system
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login
Image Unavailable, Please Login

 

I bought most of my hoses (except for some coolant) from Italian Car Parts because they were the only ones who stocked a lot of the original braided cloth lines. I wanted to keep my engine bay looking original and they had most of the hoses in 1 place.

They have them listed by prupose:
Coolant
Fuel
Oil
Vapor
Emissions
Vacuum


http://www.italiancarparts.com/

I aloso used the Braided Breather Hose Kit 308 30809065 from Superformance UK
http://www.superformance.co.uk/a-308/carb.htm

My engine bay post replacement of hoses. Looks the same as when it left the factory.
Image Unavailable, Please Login