328 ABS rear rims on mondial 3.2 | FerrariChat
Buy

328 ABS rear rims on mondial 3.2

Discussion in 'Mondial' started by mondial5183, Nov 14, 2009.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. mondial5183

    mondial5183 Karting

    Nov 17, 2007
    80
    #1 mondial5183, Nov 14, 2009
    Hi, is it possible to fit 328 ABS rear rims on mondial 3.2 ?
    i have two TRX rear wheel : about 7.08J ET 51 and i want to fit 328 ABS rear wheel 8J ET 63.5...I need spacers ? somebody tries to do it before ?
    many thanks
     
  2. mondial5183

    mondial5183 Karting

    Nov 17, 2007
    80
    #2 mondial5183, Nov 17, 2009
    Any idea ?
    Someboby could tell me mondial later 3.2 16 rear rims or mondial T offset ?
    Many thanks
     
  3. Wade

    Wade Three Time F1 World Champ
    Owner

    Mar 31, 2006
    32,793
    East Central, FL
    Full Name:
    Wade O.
    #3 Wade, Nov 18, 2009
    Last edited: Nov 18, 2009
  4. Doug

    Doug Formula 3

    Nov 13, 2003
    1,473
    Louisville KY
    Full Name:
    Doug
    #4 Doug, Nov 18, 2009
    based on your post, it appears you are saying that the current rim is 7" with a 51mm offset and the 328 rim is 8" with a 63.5 offset. If so, then the offset of the 328 rim will push the rim inward by 12.5mm or 1/2". However, the rim is @1" wider which will gain you 1/2" inner and 1/2" outer if the offsets were the same. The rim should fit. The face of the rim will fall in the same position as the current rim appearance wise, but it will gain 1" inward. You may want to check for clearance with shocks etc..... It can be pushed outward with a small spacer.
     

Share This Page