328 ac compressor | FerrariChat

328 ac compressor

Discussion in '308/328' started by vito11, Oct 5, 2014.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. vito11

    vito11 Karting

    Joined:
    Oct 8, 2006
    Messages:
    155
    Maybe I have a leak in the compressor circuit ac.
    You know what compressor to use for 328 gts 1987 ?
    My mechanic doesn't find the leak and he says that if it is in the compressor it is better to change it, but I would like an original solution.
    What's your experecience?
    Many thanks.
     
  2. Lawrence Coppari

    Lawrence Coppari Formula 3

    Joined:
    Apr 29, 2002
    Messages:
    2,192
    Location:
    Kingsport, TN
    Full Name:
    Lawrence A. Coppari
    My York compressor in my 1987 leaked at the shaft seal. I replaced the seal almost two years ago and it is still working fine.
     
  3. Basal Skull

    Basal Skull Formula Junior

    Joined:
    Oct 26, 2010
    Messages:
    427
    Location:
    Vancouver BC
    My 86 euro has a sandsen sd 507
     
  4. Saabguy

    Saabguy Formula 3

    Joined:
    Mar 28, 2012
    Messages:
    1,785
    Location:
    Shreveport, LA
  5. vito11

    vito11 Karting

    Joined:
    Oct 8, 2006
    Messages:
    155
    Hi is the page of the compressor for ferrari 328 1987?
    Many thanks.
     
  6. Saabguy

    Saabguy Formula 3

    Joined:
    Mar 28, 2012
    Messages:
    1,785
    Location:
    Shreveport, LA
    Yes if it's for the USA. It has a slightly larger displacement than the factory unit but is the same physical size and has the right fittings in the right places. I have this one installed in my '88 328.

    NOTE: You may be able to get one sooner by going to NAPA but theirs are rebuilt.
     
    Last edited: Oct 6, 2014
  7. vito11

    vito11 Karting

    Joined:
    Oct 8, 2006
    Messages:
    155
    I'm in Europe, I don't know what kind I have... what the possible other solution?
     
  8. Saabguy

    Saabguy Formula 3

    Joined:
    Mar 28, 2012
    Messages:
    1,785
    Location:
    Shreveport, LA
    Look at post # 3, that is likely the compressor you have, a Sanden SD 507.

    Thanks of course to Basal S..

    Lester
     
  9. vito11

    vito11 Karting

    Joined:
    Oct 8, 2006
    Messages:
    155
    Many thanks
     

Share This Page