328 AC rebuild Need Help with a Part | FerrariChat
Buy

328 AC rebuild Need Help with a Part

Discussion in 'Technical Q&A' started by cvanmete, Dec 14, 2004.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. cvanmete

    cvanmete Rookie

    Jun 1, 2004
    16
    McAllen, Texas
    Full Name:
    Chris
    #1 cvanmete, Dec 14, 2004
    I'm in the middle of rebuilding my York compressor and have everything I need except I noticed one of my piston rods and caps is worn pretty bad. Is there anyone out there who has replaced their compressor that I could buy your piston rods and caps out of? Or does anyone know what common car, make and year, that had a york compressor that maybe I could find one in the Junk yard. Tried to get a new replacment parts, but not available. I've put too much time into rebuilding this one just to scrap it and go get a new one.

    Thanks,
    Chris
     
  2. PWehmer

    PWehmer Formula 3

    Oct 15, 2002
    1,733
    Surrounded by Water
    #2 PWehmer, Dec 14, 2004
    I believe the compressor is readily available at NAPA or other parts stores.
    The clutch has to be taken off the old compressor.

    Do a search....
     
  3. Sean F.

    Sean F. F1 Rookie

    Feb 4, 2003
    3,066
    Kansas
    Full Name:
    Sean F
    #3 Sean F., Dec 14, 2004
    NAPA has the part you want. Get NEW not rebuilt.

    Or you can convert to a Sanden Rotary if you're going to switch to R134.

    Check a local AC shop. They probably have it cheaper than NAPA. The guy I bought my conversion stuff from in Houston had it new for less than NAPA wanted (~$50 less).
     
  4. Morrie

    Morrie Karting

    Nov 4, 2003
    207
    Sarasota/Asheville
    #4 Morrie, Dec 15, 2004
    Sean,

    I now have the rotary installed in my car and the cold air is fantastic. Far better than the stock York.

    Thanks for your help on this project
     

Share This Page