328 Coolant System Hose Size | FerrariChat
Buy

328 Coolant System Hose Size

Discussion in '308/328' started by Futureman, Jun 16, 2010.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Futureman

    Futureman Formula 3

    May 16, 2007
    2,024
    #1 Futureman, Jun 16, 2010
    Last edited by a moderator: Sep 7, 2017
    Anybody know what size hose this is: part# 42? I don't remember seeing one this small listed for the coolant system when I replaced most of the hoses 2 years ago.
    Image Unavailable, Please Login
     
  2. akimmel

    akimmel Karting

    Aug 13, 2009
    189
    Dallas, TX
    Full Name:
    Art Kimmel
    #2 akimmel, Jun 17, 2010
    It's listed in Dave Helms Hose Kit as 10MM
     
  3. FasterIsBetter

    FasterIsBetter F1 Veteran

    Jul 22, 2004
    5,855
    NoNJ/Jupiter FL
    Full Name:
    Steve W.
    #3 FasterIsBetter, Jun 17, 2010
    If you can't find 10mm metric hose (I can't seem to locate any local places that sell metric hose), either 3/8" or 7/16" would probably work. If you go with 3/8, and it is tight, try the old soap and water trick, or heat the end of the hose with a blow dryer and it should fit on.
     
  4. Rifledriver

    Rifledriver Three Time F1 World Champ

    Apr 29, 2004
    37,150
    Cowboy Capitol of the World
    Full Name:
    Brian Crall
    #4 Rifledriver, Jun 17, 2010
    3/8 fits fine. Get a good look at the nipple on the crossover pipe where it attaches. By now most of them are pretty eaten up by corrosion.
     
  5. Futureman

    Futureman Formula 3

    May 16, 2007
    2,024
    #5 Futureman, Jun 17, 2010
    Thanks guys. I'll be sure and check the cross over pipe too, Brian. Thanks for the tip.
     

Share This Page