328 Engine Rebuild - technical needed | FerrariChat
Buy

328 Engine Rebuild - technical needed

Discussion in 'Technical Q&A' started by cliff judd, Oct 14, 2018.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. cliff judd

    cliff judd Rookie

    Oct 14, 2018
    2
    Full Name:
    cliff judd
    #1 cliff judd, Oct 14, 2018
    Hello looking for your technical assistance on a 328 engine rebuild. The car has been driven into a flood and induced water. It did have an engine rebuild at Ferrari, only to run for approx 100 miles and then failed to start ! The Car got laid up then for many many years. I purchased it as a project and have stripped the engine. I need to check the Con rod set for size before the rebuild. I have a company to resize bore or hone then back to the original spec, BUT we need to know what the original size is - car in question a Mondial 3.2 QV D registration UK car Many thanks in advance cliff
     
  2. Steve Magnusson

    Steve Magnusson Two Time F1 World Champ
    Lifetime Rossa

    Jan 11, 2001
    26,932
    30°30'40" N 97°35'41" W (Texas)
    Full Name:
    Steve Magnusson
    #2 Steve Magnusson, Oct 14, 2018
    Go here:

    http://ferrari.cdyn.com/

    and download the 308QV/328 WSM. It has the dimensions you want for the 3.2L engine.
     
  3. cliff judd

    cliff judd Rookie

    Oct 14, 2018
    2
    Full Name:
    cliff judd
    #3 cliff judd, Oct 15, 2018
    What can i say Fantastic platform ~ Ferrari Chat for the service. And a big thankyou to Steve for the technical information. Thanks to you my engine build rolls onto the next level. Never ever driven a Ferrari . So my life long dream is another step closer. I will keep a look into the forum . all the best from a very cold and wet England .
     

Share This Page