328 "fog" lights wiring change | FerrariChat

328 "fog" lights wiring change

Discussion in '308/328' started by mike996, May 7, 2022.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. mike996

    mike996 F1 Veteran

    Jun 14, 2008
    6,871
    Full Name:
    Mike 996
    I would like to wire the fog lights so that they will turn on/off with the ignition, while still going through the console-mounted switch. As a basically lazy person, I'd prefer getting guidance from someone who has done this mod instead of trying to figure it out myself. o_O
     
  2. Dave Bertrand

    Dave Bertrand Formula Junior
    Rossa Subscribed

    Dec 24, 2005
    824
    Castle Rock, CO
    I haven't done this mod myself, but the way I would do it is by putting a jumper wire on the fuse panel. First find a fuse that has 12V on the input side only with ignition on. Then run a jumper from that fuse to the fog light fuse input. I assume that input would normally have 12V available only with ignition on and with the lights on and fog light switch on, so theoretically this would bypass all that and just energize the circuit whenever the ignition is on.

    That's just off the top of my head. Somebody smarter may have a better idea.
     
  3. Sigmacars

    Sigmacars Formula 3
    Silver Subscribed

    Jul 19, 2006
    1,218
    That’s a good way to do it but also change the bulbs to LEDs it will put the draw way down and it is brighter also
     

Share This Page