328 GTS BATTERY QUESTION | FerrariChat

328 GTS BATTERY QUESTION

Discussion in '308/328' started by JohnP, Apr 25, 2008.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. JohnP

    JohnP Karting

    Nov 23, 2007
    159
    Richmond Hill
    Full Name:
    John
    Are the posts toward the rear of the car or the front?
     
  2. GeoMetry

    GeoMetry Formula Junior

    Apr 14, 2008
    471
    Virginia
    Full Name:
    Richard
    In my 308 they are towards the rear but I can't prove that is the correct position. I would say it makes sense because it puts them further from the battery cover which is metal and could cause a short circuit.
     
  3. gphpe

    gphpe Rookie

    Jan 14, 2008
    38
    Central Coast, CA
    Full Name:
    Gary
    My battery posts are to the rear.
     
  4. Bullfighter

    Bullfighter Two Time F1 World Champ
    Lifetime Rossa Owner

    Jan 26, 2005
    22,600
    Gates Mills, Ohio
    Full Name:
    Jon
    I have a 328. The posts and hold-down clamp are nearer the nose of the car.

    You want an MT34R, I believe, so that the terminals are in the OEM positions (reversed from on a 'normal' battery).

    328 GTB would have the same battery arrangement, fyi.
     
  5. jwtfjwtf

    jwtfjwtf Karting

    Oct 9, 2006
    225
    Temecula, CA
    Full Name:
    Joshua Ferguson
    +1
     
  6. Ferrari328GT

    Ferrari328GT Karting

    Jan 6, 2008
    232
    Phoenix, Arizona
    Full Name:
    Steve
    #6 Ferrari328GT, Apr 25, 2008
    Last edited by a moderator: Sep 7, 2017
    Good question! Not that it matters, but there is one picture in the Owner's Manual that shows the terminals towards the front of the car. Mine is "incorrect", too. If you look at the picture below, it makes sense that it should be in the front - the positive cable would have less of a bend. The only way I could remedy the situation would be to get a new battery with the terminals reversed. ..Next time. -Steve
    Image Unavailable, Please Login
     
  7. JohnP

    JohnP Karting

    Nov 23, 2007
    159
    Richmond Hill
    Full Name:
    John
    The posts to the rear is correct I think. The battery cover will hit the terminals if they are in the front. Then we have a short and a possible fire. The battery cover is steel i think( I don't have one) but just had one made out of 1/4" aluminum. I think it should have been thinner and possibly steel. Can anyone confirm the thickness and material used from factory?
     
  8. gphpe

    gphpe Rookie

    Jan 14, 2008
    38
    Central Coast, CA
    Full Name:
    Gary
    #8 gphpe, Apr 26, 2008
    Last edited by a moderator: Sep 7, 2017

Share This Page