328 inserts | FerrariChat

328 inserts

Discussion in '308/328' started by donald, Jun 21, 2006.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. donald

    donald Karting

    Joined:
    Aug 11, 2004
    Messages:
    197
    Location:
    Dallas, Texas
    Full Name:
    Don
    Can someone tell me where to get the precut exhaust inserts that will remove the whistle noise? I cut my own but they do not stay in there verl well on passenger side and need a thicker gauge metal.....which I have not easily found.

    Thanks.......I did a search with no luck but swear I read it before.
     
  2. DannyR

    DannyR Karting

    Joined:
    Apr 6, 2005
    Messages:
    129
    Location:
    Alabama
    Full Name:
    Danny Roberts
    Forget the inserts. Just smear some exhaust pipe sealer (or very high temp silicone) in and pipes to cover as many holes as possible. Let it sit overnight to really cure up. Over time the exhaust will color it all black inside and you'll never see it. Pay paticular attention to the right side pipe. Next time you run the car,the whistle will be gone.

    Danny
     
  3. andy308

    andy308 Formula 3

    Joined:
    Jan 16, 2005
    Messages:
    2,025
    Location:
    Sarasota, FL
    Full Name:
    Andy
    Danny is right, it is very easy, cheap and lasts. It eliminates the chirping sound right away!
     
  4. donald

    donald Karting

    Joined:
    Aug 11, 2004
    Messages:
    197
    Location:
    Dallas, Texas
    Full Name:
    Don
    Thanks guys! I will try that.....
     
  5. donald

    donald Karting

    Joined:
    Aug 11, 2004
    Messages:
    197
    Location:
    Dallas, Texas
    Full Name:
    Don
    I tried this and the whistle is gone! Very easy and inexpensive.....just a little messy as it is easy to get some of the stuff on the edges of tailpipe, etc.
     

Share This Page