328 Jack Pouch | FerrariChat
Buy

328 Jack Pouch

Discussion in '308/328' started by robbie, Jun 16, 2007.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. robbie

    robbie F1 Rookie

    Aug 26, 2005
    3,015
    Los Gatos, CA
    Full Name:
    Robert
    #1 robbie, Jun 16, 2007
    I was browsing through my jack pouch (1988 328 GTS) or whatever you call the vinyl w/leather straps thingy that holds the jack. I have a couple of questions .. OK three questions. First, There are three belts, two Gates and one Continental .. What do these fit and are the brands the original ones? Second, There is a green and grey container has some light bulbs but it also has a black plastic U-shaped piece that obviously holds something in the horizontal position .. what does it hold? Spark plug maybe? Finally, there are two pouch compartments in front of the larger compartment that holds that green and grey container. What is suppose to be in those two small compartments?

    I've tried to search on these answers with no success so I've turned to the true experts. Thanks.

    Robbie
     
  2. DBR328&330

    DBR328&330 Formula Junior

    May 31, 2001
    605
    Winchester, VA
    Full Name:
    Daniel Reese
    #2 DBR328&330, Jun 16, 2007
    Hi Robbie,

    1 belts are for AC, alternator, and (?) water pump. they probably are the correct brand but not sure.

    2 a light bulb. However the case was used on a lot of Ferraris and in the case of the (US) 328 it does not have this bulb.

    3 spark plugs- 2

    Dan Reese
     
  3. Mike328

    Mike328 F1 Rookie

    Oct 19, 2002
    2,655
    Boulder, CO
    Full Name:
    Mike
    #3 Mike328, Jun 16, 2007
    Is the U-shaped piece a flat-blade type fuse puller? Does the spare bulb/fuse container of yours actually hold this piece?
     
  4. 330gt

    330gt Formula 3

    Nov 12, 2004
    2,105
    Seattle, WA
    Full Name:
    Kerry Chesbro
    #4 330gt, Jun 17, 2007
    A Quartz-Iodine replacement headlight bulb. Wouldn't be in a kit for a US spec car since they came with seal beams to meet US standards at the time.
     
  5. robbie

    robbie F1 Rookie

    Aug 26, 2005
    3,015
    Los Gatos, CA
    Full Name:
    Robert
    #5 robbie, Jun 17, 2007
    Its not a fuse puller . there was a flat blade fuse in the container but I think it was put in there by the prior owner since it was loose. The black thing is part of the container and looks like a curved U-shape that you can insert a bulb or something cylindrical that would gently snap in place. Another thread answer was a small headlight bulb not used on US spec cars. Seems logical.

    Robbie
     

Share This Page