328 on non standard tyres | FerrariChat

328 on non standard tyres

Discussion in '308/328' started by 328Matt, Jan 27, 2005.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. 328Matt

    328Matt Karting

    Joined:
    Dec 3, 2003
    Messages:
    222
    Location:
    Lymm,Cheshire
    Full Name:
    Matt
    Anyone out there have a picture of a 328 on 225/50 fronts and 245/45 rears.I know a few of you have done this and wonder what they look like.I am worried that the gap around tyre and arch will be too large.Pictures appreciated!
     
    328Matt, Jan 27, 2005
    #1
  2. Mike C

    Mike C F1 Veteran Lifetime Rossa Owner

    Joined:
    Aug 3, 2002
    Messages:
    6,081
    Location:
    Southeast USA
    Full Name:
    Mike Charness
    As you can see from the tire-size calculation spreadsheet below, there is almost no difference in overall outside diameter between the stock tire sizes and the "upsizes". There are some variations between tire brands, but overall there is usually no obvious visual difference from stock. You're adding width, but keeping the same sidewall height within about a tenth of an inch.
    Image Unavailable, Please Login
     
    Last edited by a moderator: Sep 7, 2017
    Mike C, Jan 27, 2005
    #2

Share This Page