328GTs Door alignment | FerrariChat

328GTs Door alignment

Discussion in 'Technical Q&A' started by zapper/dapper, Feb 27, 2004.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. zapper/dapper

    zapper/dapper Rookie

    Feb 26, 2004
    47
    I have a 328 GTS and the driver's door is out of alignment and not able to
    lock door from outside. Inside. no problem, and once it is locked it will unlock, but the key doesn't seem to go far enough to lock the buttom down.
    Need advice on fixing.. as well as opeing up door panel to check the rods for the dorr.
    Thanx
     
  2. f355spider

    f355spider F1 World Champ
    Owner Rossa Subscribed

    May 29, 2001
    17,913
    USA
    Your message is a bit confusing; is the door out of alignment, or is the lock a problem (key doesn't go in all the way) or both?

    Removing the door panel is very simple, just remove the lock pull on top (unscrew it), the trim screws around the perimeter, and the screws holding on the armrest assembly. You will also need to unplug the window switches as the panel comes off.
     
  3. carlrose

    carlrose Formula Junior

    Nov 25, 2003
    321
    Hi Z,

    Check the parts & service section. I posted a bit there about door panel removal.

    :) Carl
     

Share This Page