330 GTC lower rocker trim screws? | FerrariChat
Buy

330 GTC lower rocker trim screws?

Discussion in 'Vintage (thru 365 GTC4)' started by machineryhill, Nov 7, 2015.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. machineryhill

    machineryhill Karting

    Nov 11, 2011
    66
    Full Name:
    Dan
    #1 machineryhill, Nov 7, 2015
    Last edited by a moderator: Sep 7, 2017
    Anybody who thinks they have original;

    What type of screws do you have holding the black trim along the bottom of your rocker panels? Flathead, oval head...and are they sheet metal screws or do they have nuts on the back.

    Seems like a dumb little detail but I have round head sheet metal screws on mine and they don't look original. I've seen philips flat head screws on another car.

    Sorry, I don't understand why my photo inserts upside down no matter what I try.

    Thanks very much.
    Image Unavailable, Please Login
     
  2. machineryhill

    machineryhill Karting

    Nov 11, 2011
    66
    Full Name:
    Dan
    #2 machineryhill, Nov 7, 2015
    Woops, it previewed upside down but posted correct.
     
  3. Jumprun

    Jumprun Karting

    Feb 7, 2012
    227
    Southern California
    Full Name:
    T. Martinez
    #3 Jumprun, Nov 7, 2015
    My 11157 car has phillips flat head screws with a nut. This car has never been restored and probably never hit, but since I'm the 6th owner who can say for sure if the screws are original?
     
  4. machineryhill

    machineryhill Karting

    Nov 11, 2011
    66
    Full Name:
    Dan
    #4 machineryhill, Nov 8, 2015
    Thanks for the information Jumprun, I think I'll change mine to that setup. I did see another car like that.
     
  5. todaxyz

    todaxyz Karting

    Jul 16, 2009
    133
    Nor Cal
    Full Name:
    Tom
    #5 todaxyz, Nov 8, 2015
    My car, 10489, has the same set up.
    Tom
     
  6. Edc2104

    Edc2104 Karting
    Rossa Subscribed

    May 21, 2011
    101
    Greenwich CT
    Full Name:
    Evan
    #6 Edc2104, Nov 13, 2015
    Last edited by a moderator: Sep 7, 2017
    Definitely flat phillips with a nut on the back.

    I couldn't grab a great pic of the nut on the back, but it's there.

    Hope this helps.
    Image Unavailable, Please Login
     
  7. machineryhill

    machineryhill Karting

    Nov 11, 2011
    66
    Full Name:
    Dan
    #7 machineryhill, Nov 14, 2015
    Yes, thanks very much. Painted m3 flathead phillips screws with brass washers and nuts.
     
  8. dhodge

    dhodge Rookie

    Dec 15, 2004
    15
    Miami
    #8 dhodge, Nov 17, 2015
    I'm looking for those rocker trim pieces. Anyone making them?
     

Share This Page