348 12v power source question | FerrariChat

348 12v power source question

Discussion in '348/355' started by Headrips, Jan 26, 2011.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Headrips

    Headrips Rookie

    May 24, 2010
    49
    Orlando
    Full Name:
    Scott
    Hi guys, I have a 1990 348 ts....anyone know where I can tap into 12v (key switched) in the engine bay? Trying not to run all the way to the fuse panel......and going direct to the battery will result in drain when off....



    Thanks in advance,

    Scott
     
  2. Miltonian

    Miltonian F1 Veteran

    Dec 11, 2002
    5,966
    Milton, Wash.
    Full Name:
    Jeff B.
    What's wrong with running your wire up to the fuse panel?

    If you really want 12V switched power on a dedicated circuit in the engine compartment, perhaps you could modify the power source behind the center console and tie into the wire for the rear fog lights, which would be unused in a USA model 348. Not sure that would work, but it's a thought.
     
  3. Headrips

    Headrips Rookie

    May 24, 2010
    49
    Orlando
    Full Name:
    Scott
    Hmmm...not sure where to look for that wire....maybe the fuse box is the best way after all....thanks!
     

Share This Page