348/355 Exhaust Question | FerrariChat
Buy

348/355 Exhaust Question

Discussion in '348/355' started by xpensivewino, Jun 24, 2008.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. xpensivewino

    xpensivewino Formula Junior

    Jan 26, 2008
    960
    Simi Valley CA
    Full Name:
    Need to know basis
    #1 xpensivewino, Jun 24, 2008
    I noticed that there seems to be many more used 355 exhaust systems for sale, such as tubi's etc... Dimentionaly can a 355 exhaust system be adapted to a 348 ?? The cars have very similar layouts and dimentions, just wondering if they are even in the same universe.....Thanks for any feed back you have.
     
  2. Ricambi America

    Ricambi America F1 World Champ
    Sponsor Owner

    Dec 7, 2003
    16,476
    Winston Salem, NC
    #2 Ricambi America, Jun 24, 2008

    They are not in the same universe. Y-pipe inlet, and primary inputs are quite different.
     
  3. xpensivewino

    xpensivewino Formula Junior

    Jan 26, 2008
    960
    Simi Valley CA
    Full Name:
    Need to know basis
    #3 xpensivewino, Jun 24, 2008
    Thanks....that takes care of that.....
     
  4. gothspeed

    gothspeed F1 World Champ

    May 26, 2006
    10,244
    U.S.A.
    Full Name:
    goth
    #4 gothspeed, Jun 24, 2008
    +1 ..... The 348 has a much better layout IMO. It is similar to the 360/430 where there is only one flow path after the header collector and through the cats into the muffler. The 355 splits the exhaust flow after the collector with a 'bypass' valve into two separate paths for each cylinder bank. 355 has four cats, primary and secondary.
     

Share This Page