348 ABS light | FerrariChat

348 ABS light

Discussion in '348/355' started by Racing-Baker, May 24, 2024.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Racing-Baker

    Racing-Baker Karting

    Joined:
    Jan 11, 2008
    Messages:
    217
    Location:
    Beveren Leie
    Full Name:
    Enzo Duquesnoy
    Hi,

    I have an 348 with an ABS light dant won't go off. I previously put on new front brake discs, bled the system and had the ABS light.

    I placed the fuse and got an error code that was a rear left sensor I guess, once.

    The ECU was already swapped with another one, also the relays. Then I bled the rear and front system again to be sure.

    Can someone get me on the way?


    Thanks
    Enzo
     
    Racing-Baker, May 24, 2024
    #1
  2. Qavion

    Qavion F1 World Champ Silver Subscribed

    Joined:
    Feb 20, 2015
    Messages:
    14,271
    Location:
    Sydney
    Full Name:
    Ian Riddell
    Did you remove the test fuse? :p

    Have you read the bleeding and test procedures and tips in the WSM? To erase the ECU fault memory, you have to drive above 40kph. I don't know if the fault light goes off before this time (experts?)
     
    Qavion, May 24, 2024
    #2

Share This Page