348 accelerator | FerrariChat
Buy

348 accelerator

Discussion in '348/355' started by fmomen, Jan 13, 2008.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. fmomen

    fmomen Karting

    Oct 4, 2004
    239
    india
    Full Name:
    faisal
    #1 fmomen, Jan 13, 2008
    Hi, I am facing a peculier issue recently with the accelerator of my 348. the car doesnt seem to bring the revs back down after accelerating. it takes at least 1-2 secs before the revs come back down. has anyone had a similar problem. What can I do to fix it. Thanks
     
  2. Miltonian

    Miltonian F1 Veteran

    Dec 11, 2002
    5,966
    Milton, Wash.
    Full Name:
    Jeff B.
    #2 Miltonian, Jan 14, 2008
    1) Check to make sure that your floor mat hasn't been pushed underneath the gas pedal, it's the most common problem.

    After that, you would need to find out if the pedal shaft needs lubrication, or if the cable is sticking inside the housing, or if the linkage cross shaft at the engine is hitting something. If it's all OK mechanically, then you may have a vacuum leak. Chances are that it's something simple.
     
  3. Mera

    Mera Formula Junior

    Aug 13, 2005
    768
    Milwaukee, WI
    Full Name:
    Rodney Dickman
    #3 Mera, Jan 14, 2008
    Happened to me when I first bought my 348. It was the floor mat. I had the OEM mats under aftermarket mats. So I took the OEM mats out.

    Rodney
    1990 348 TS
     

Share This Page