348 Alignment? | FerrariChat

348 Alignment?

Discussion in 'Technical Q&A' started by Jlink, Dec 11, 2004.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Jlink

    Jlink Rookie

    Joined:
    Nov 30, 2003
    Messages:
    22
    What are the factory alignment specs on the 348?

    How much camber (front and rear) is attainable with the stock parts (at factory ride height)?
     
    Jlink, Dec 11, 2004
    #1
  2. 348SStb

    348SStb F1 Rookie Owner

    Joined:
    Apr 9, 2004
    Messages:
    2,991
    Location:
    Palm Beach County, FL or Nassau County, NY
    Full Name:
    Dave
    I don't know, but remember that the Spiders and the Serie Speciale 348s have slightly different alignment specs than the other 348s.
     
    348SStb, Dec 11, 2004
    #2
  3. rivee

    rivee F1 Rookie

    Joined:
    Jan 20, 2002
    Messages:
    3,731
    Location:
    Nowhere important, USA
    Full Name:
    John
    The front camber is -.3 to -.5 degrees

    The rear camber is -1.5 to 2.10 degrees

    Front toe in is 2-3mm

    Rear toe in is 2.5-3.5mm

    Front caster is 5.30 to 15 degrees

    These figures are right from the WSM page F20
     
    rivee, Dec 12, 2004
    #3
  4. PassionIsFerrari

    PassionIsFerrari Formula 3

    Joined:
    Aug 15, 2004
    Messages:
    2,454
    Will these specs hold true to any wheels you put on a 348...I am putting 360 wheels on my 348 and want to make sure it is aligned correctly...would I still use these specs?
     
    PassionIsFerrari, Jun 22, 2005
    #4

Share This Page