348 Challenge Fuel Feed System Upgrade | FerrariChat

348 Challenge Fuel Feed System Upgrade

Discussion in 'Challenge/GT Cars/Track' started by Jasonberkeley, Oct 8, 2017.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Jasonberkeley

    Jasonberkeley Formula 3

    Apr 23, 2017
    1,321
    NW Corner, CT
    Full Name:
    Jason Berkeley
    Image Unavailable, Please Login Does anybody have any photographs of these parts installed or loose and out of the car by chance?

    See attached system diagram from Ferrparts web site.

    Thanks,

    Jason
     
  2. Ianbts

    Ianbts Karting

    Nov 4, 2011
    94
    Nottingham
    Full Name:
    Ian Sterling
    I checked my 1993 Italian 348 Challenge and it has what looks like the standard fuel feed system.

    The setup above looks to have been listed as part of the Challenge kit in 1994 and my car had the engine modified to '119H' spec around that time, but I guess they chose not to fit this fuel valve at the time?

    The 94' regs mention that, on vehicles fitted with the 119/G motor, the fuel pumps could be replaced with part no. 15099 to improve scavenging. I don't know if changing the fuel pumps led to the new new fuel valve set up?

    Sorry I can't help with a picture.
     
  3. Jasonberkeley

    Jasonberkeley Formula 3

    Apr 23, 2017
    1,321
    NW Corner, CT
    Full Name:
    Jason Berkeley
    Hi Ian- thanks so much for taking the time to look and respond! Greatly appreciated!
     
  4. SoCal1

    SoCal1 F1 Veteran
    Owner

    Jun 14, 2011
    8,562
    SoCal LA/OC/New Mexico
    Full Name:
    Tim Dee
    Not sure either. To me it looks like aback purge valve
    I dont have it on mine
     
  5. Jasonberkeley

    Jasonberkeley Formula 3

    Apr 23, 2017
    1,321
    NW Corner, CT
    Full Name:
    Jason Berkeley
    Thanks SoCal. Appreciate another data point!

    Anyone else able to take a peek?
     
  6. fatbillybob

    fatbillybob Two Time F1 World Champ
    Consultant Owner

    Aug 10, 2002
    26,368
    socal
    My 94 challenge manual shows part 3 as valvola prelievo. I believe this set up was for fuel sampling for tech inspection. There was no performance advantage here.
     

Share This Page