348- E5 & E6 Error & Bad Air Recirc Flap Motor | FerrariChat

348- E5 & E6 Error & Bad Air Recirc Flap Motor

Discussion in '348/355' started by jim94-348, Aug 23, 2010.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. jim94-348

    jim94-348 Formula Junior
    Owner Silver Subscribed

    Aug 19, 2010
    981
    Greenville, NC
    Full Name:
    Jim
    I am getting an E6 error and then an E5 when I turn my car on on the AC unit. I know from reading other posts that this is generally the motors for the air circulation flap motor and the water heating valve motor. I took the flap motor off and the air circ flap works great. The motor is getting 8.5 volts but does not turn even when it is out of the flap assemble so I assume the motor is probably bad. Does anyone know a part number and where I can get one?

    I also think I have a bad stepper motor on the water heating valve. I took it off an it doesn't seem to move when I switch the A/C on and off. The links at http://my348.com/ don't work and I can't find the Saab or Bosch part number in the US. Any help with a part number or place to purchase it would be greatly appreciated.
     
  2. Paresh

    Paresh Karting

    Oct 5, 2009
    57
    Illinois
    Full Name:
    Paresh
    Is your flapper laying in the box? Check.... if so, you may only need the brass fitting. Again, I can help.... check out my posts.
     
  3. jim94-348

    jim94-348 Formula Junior
    Owner Silver Subscribed

    Aug 19, 2010
    981
    Greenville, NC
    Full Name:
    Jim
    I fixed it. It was a bad flapper motor. I got one from Ricambi and the E6 is gone. Still working on the E5 is anyone has any ideas.
     
  4. Paresh

    Paresh Karting

    Oct 5, 2009
    57
    Illinois
    Full Name:
    Paresh
    email me at [email protected]

    Ill try to help. Took me over 3 months to resolve this problem.
     

Share This Page