One of my fog lights is really milky/foggy as if moisture got inside the lens. I would appreciate help as to: 1. Is it possible to easily separate the lens cover from housing (I hope it is not glued together). 2. R&R instructions. The lens is otherwise in perfect shape so I want to be able to just clean and re-assemble without (hopefully) breaking anything. I searched forum archives and really did not find any HOWTOs on this. Thank you! Bart
Just take the back off the fog light Bart. You'll have to take the fog light out, which is really easy. If you want I can come over and give you a hand, but you can totally do it yourself. 1) remove the cover for the screws holding the fog light to the bumper 2) unscrew the two screws holding the fog light in place 3) from the slander side (the side pointed in towards the center of the bumper) pull the light out 4) disconnect the wires from the fog light 5) turn the light over and unscrew the backing from it easy-peasy
