News

348 GAS CAP CONSOLE BUTTON?

Discussion in 'Technical Q&A' started by Oengus, May 1, 2005.

  1. Oengus

    Oengus F1 Veteran
    Rossa Subscribed

    Sep 29, 2004
    8,304
    Between timing belts or OH, SC, CO, CT
    Full Name:
    Chas
    My gas cap release button on the console won't seat properly into the socket, it just bobbles around in the slot. Is there a trick to this? I also bought a new button from Ricambi to no avail.

    Any thoughts would be appreciated.

    chas
     
  2. To remove this ad click here.

  3. evansp60

    evansp60 Formula Junior

    Nov 2, 2003
    383
    Ottawa, Ont. CANADA
    I assume you've had it out to replace it. Does the button move freely when it's removed from the faceplate? There has to be something in the way, or it's not seated properly.
     
  4. Dcup

    Dcup F1 Veteran

    Jan 3, 2005
    8,503
    Between 2 Implants
    Full Name:
    Claude Balls
    i believe you can buy the little clips that hold the buttons in place. when i bought my 348 ALL the buttons where siliconed in, a pretty shi^ty remody, but when i took her to the trim shop thats what was needed. the clips are pretty cheap.
     
  5. Oengus

    Oengus F1 Veteran
    Rossa Subscribed

    Sep 29, 2004
    8,304
    Between timing belts or OH, SC, CO, CT
    Full Name:
    Chas
    I must need the clips then.

    Anyone know where to get them?
     

Share This Page