348 Help | FerrariChat
Buy

348 Help

Discussion in '348/355' started by Majin_JT, Jan 18, 2011.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. Majin_JT

    Majin_JT Formula Junior

    Mar 15, 2008
    395
    UK
    Full Name:
    JT
    #1 Majin_JT, Jan 18, 2011
    hello everyone i would like to no does any1 have a guide on how to take the electric window brackets off well all the mecho as my arms have snapped and im wanting to take it out so i can get it sorted any help would be great please help

    John
     
  2. ernie

    ernie Two Time F1 World Champ
    Lifetime Rossa Owner

    Nov 19, 2001
    22,620
    The Brickyard
    Full Name:
    The Bad Guy
    #2 ernie, Jan 18, 2011
    You need to take off the door panels first. Robby made a nice post on how to remove the panel http://ferrarichat.com/forum/showthread.php?t=191977&highlight=355+door+panel+removal It's for a 355 but the procedure is pretty much the same for a 348.

    Make sure you have the window rolled all the way down when you go to remove it. Once you have the panel/s off you will then have access to the inner door frame bolts. Disconnect the speaker/s and remove them, then remove the retaining bolts for the inner frame and take it out. After you unbolt the window regulator you will need to tip it down, towards the front of the car, and then lifting up the rear part take it out. Don't for get to disconnect the wiring before you take the window regulator out.
     

Share This Page