348 Manifolds - Again - Need a 348 in TX

Okay, it seems that after I made the last thread claiming there wasn't enough demand for them, I received enough PM's from upset lurkers to determine there is. My apologies for underestimating the brotherhood!

Now, what I need is a 348 owner in TX that will let us borrow their car for 2-3 days for design purposes, we will then send the drawings out to get a finished product, we estimate this will take 2 weeks. We will then request you bring your car back and we will install the 348 headers free of charge, the charge of the headers will be very heavily discounted and discussed privately.

Note - We will be putting your car on a dyno two times for before and after results. The dyno is roughly 30 minutes from our shop, you can drive it to the dyno or you can give us permission to, whatever is easiest for you.

First 2 attempts didn't work out very great due to lack of demand, but they say 3rd is a charm.

I need this to happen anytime after January 2nd - March. If I can't find a car in between then the project will have to be delayed another 6 months because our engineer/designer will only be coming by twice a year.

For anyone who has not heard about this in the past:

348 Exhaust Manifolds in 304 or 321 stainless steel.

Estimated Price $3,000

We plan on picking up a minimum of 15whp, we already did 17whp in the F355.



Regards,
Kevin