348 348 Parts Thread

Does anyone have a cross reference for a windshield washer spray nozzle? I've searched high and low across every 80s/90s brand I can think of for a match and found nothing.

 

While individual new spark plug connectors can't be sourced outside of a full leads set, there are cheaper options than the Ferrari item. Superformance sells a full set (boots + leads + angled connectors) for a very reasonable 399 GBP. When I researched it some time ago I found out that it is made by a reputable outfit in Germany and I can attest to its very high quality. But no, the spark plug connectors don't have the prancing horse on them.
Image Unavailable, Please Login

 

Image Unavailable, Please Login Image Unavailable, Please Login

 

Found a pair of these on EBay so I figured lets try it and see how close they are. Perfect match and they only cost $11.74 all in for a pair. They are primarily used on Volvo and Mack trucks.

 

Used for what?

Sent using FerrariChat.com mobile app

 

Ahh windshield washer spray nozzle...

 

Windscreen washer jets

 

Wow! Fantastic.

 

14202580 - “Block” used to hold in screws to affix things to sheet metal. Used all over the car. NLA from Ricambi. May help someone from wasting time finding a dumb piece of plastic.
Image Unavailable, Please Login Image Unavailable, Please Login

 

Should have clarified, from Ace, Chrysler #8. Uses a #8 sheet metal screw. SKU is also there for a positive ID.

 

Not following at all. Are you saying that was in Ace hardware stores? Googled that part number, no dice, xref to Hillman which is NLA on amazon, ebay, in Mexico, in the UK everywhere. I did find them in a hardware store online but the picture is not the same. Another place had them but instore pickup in Ohio.

 

I was just saying that they have been available locally at all the hardware stores I have looked at. Hillman section in the License Plate Hardware bins specifically. Also I found some online. Im sure other sites have them too, this is just the first one I stumbled across.
Image Unavailable, Please Login

 

I'll check my local Ace thanks!

 

P/N 142821 Pipe from radiator to tank - Has foam insulation on it that becomes brittle and disintegrates over time. This is not offered as a separate part from Ferrari but I found the perfect replacement. Aeroflex 212-Ac11838 3/4" X 6 Ft. Pipe Insulation, 3/8" Wall. The 212-AC11838 is the part number that can be searched. It is also called Aerocel and is rated up to 300 degrees farenheit.

 

Hi everyones,

This thread is very usefull !
Making my contribution with the last operation I made few weeks ago.

I changed CV-joint (OEM ref 103885CV) on my 348 (1991) that cost around 110 $ + Tax + shipping.
I found an other reference SKF : VKJA 8831 that fit perfecly (same weight - dimension) and cost is around 50 / 60 $ from retailers.

Image Unavailable, Please Login
attention on the picture the silver screws are the wrong ones.

Enjoy !

 

can parts be listed for sale in this thread or is it just for sourcing ?

 

Classified section is for sale items.

Sent using FerrariChat.com mobile app

 

I have an update for this one. This is Amazon Canada, so the US price is likely lower:

https://www.amazon.ca/Bosch-0280122001-Throttle-Position-Sensor/dp/B000UIOQT8/ref=sr_1_1?crid=2UNSZC20S5MJG&keywords=0280122001+bosch&qid=1655824385&sprefix=0280122001+bosch%2Caps%2C52&sr=8-1

Bosch # 0280122001

 

Hi everyone,
During a concours event I recently got dinged for not having a "trim piece around the inside door latch"
I've looked through a dozen exploded versions of 348s, searched on line for the item, been to the dealership and enquired (they thought I was nuts), so I'm asking: does anyone know what that looks like or what part I should order?

Thanks for any help you can supply

 

Does anyone know where I can find a vapor canister part 138418 for a 1994 Spider?

 

yeah...there's a thread somewhere on fchat of a guy getting one from vintage fiat or alfa....I can't remember if this was it...

Image Unavailable, Please Login

 

Yea there’s an alternate listed on here somwhere. I put it in my Mondial T. Requires a little cutting.

 

Really? I need a 1990 348 glove box strut! Do you have a part #, or is that a hypothetical? Sorry if so...

 

Probably have to search the thread. You seemed to have skipped the 650 posts inbetween.

That said a new strut will also fail within 90 days or so, which is why some vendors won't even sell them anymore.

You can put a spring on the oem strut and have it actually work, several threads on that from good to mediocre solutions.


Sent from my SM-G990U using FerrariChat.com mobile app

 

There's a glovebox?