348 rear lid badge sizes | FerrariChat
Buy

348 rear lid badge sizes

Discussion in '348/355' started by 2mmuch, Dec 24, 2015.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, Skimlinks, and others.

  1. 2mmuch

    2mmuch Formula Junior
    BANNED

    Nov 3, 2003
    326
    Ontario
    Full Name:
    Luigi
    #1 2mmuch, Dec 24, 2015
    Last edited by a moderator: Sep 7, 2017
    Can someone please give me some sizes of the badge on the back of there 348. Lengths, Widths and thickness if possible. I am 3d printing one up for my 348 series speciale and would like to get it close. Once I get the sizes I will fill in the joins.

    Thanks
    Image Unavailable, Please Login
     
  2. m.stojanovic

    m.stojanovic F1 Rookie
    Silver Subscribed

    Dec 22, 2011
    3,291
    Serbia - Niš
    Full Name:
    Miroljub Stojanovic
    #2 m.stojanovic, Dec 24, 2015
    3 - 25 x 30 mm,

    4 - 25 x 29 mm

    8 - 24.5 x 29 mm

    t - 25 x 36/15 mm (36 is the long line, 15 is the total width of the "t" if you ignore the long line)

    b - 25 x 20 mm
     
  3. m.stojanovic

    m.stojanovic F1 Rookie
    Silver Subscribed

    Dec 22, 2011
    3,291
    Serbia - Niš
    Full Name:
    Miroljub Stojanovic
    #3 m.stojanovic, Dec 24, 2015
    "348" - face 5 mm wide, overall 6.8 mm

    "tb" - face 4 mm wide, overall 4.6 mm

    The numbers and the letters have a 45 deg. chamfer at the face, approx 1 mm

    Badge thickness: 3.2 mm
     

Share This Page